Water Conditioners

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Safe Powder is a concentrated dry conditioner for freshwater and saltwater aquariums. This concentrated conditioning powder removes chlorine and chloramine from tap water, detoxifies nitrite and nitrate, and converts ammonia into a safe, non-toxic form for more efficient removal by the biofilter.

• Removes chlorine, chloramine and ammonia from water
• Detoxifies nitrite and nitrate
• Non-acidic, highly effective dry conditioner for fresh and saltwater

Seachem Safe Powder will not impact pH levels or overactivate skimmers. It may be used during tank cycling to alleviate ammonia/nitrite toxicity, during start-up or whenever adding or replacing water.

Note: Safe is the dry version of Seachem Prime and shares all of its advantages; however, Safe is even more concentrated than Prime.

Directions for Use:
Note: These directions supersede all other prior packaging.

Directions for 10 g and 50 g:
Use 100 mg Safe (scoop) per each 100 L (25 gallons) as needed to reduce chlorine and chloramine or per 25 L (6 gallons) for ammonia.

Directions for all other sizes:
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 gallons) for ammonia.

May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem Prime is the complete and concentrated conditioner for both fresh and saltwater aquariums. Use during startup and water changes to eliminate and detoxify harmful chemicals in tap water and make your aquarium safe for fish.

• Removes chlorine, chloramine and toxic ammonia
• Detoxifies nitrite and nitrate
• Provides protective slime coat

Prime is safe for fresh and saltwater aquariums. It detoxifies ammonia, nitrite and nitrate, allowing the biofilter to more efficiently remove them. Use Sechem Prime to detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Seachem Prime is non-acidic, will not impact pH and will not overactivate skimmers.

Use at startup and whenever adding or replacing water. Prime may also be used during tank cycling to alleviate ammonia/nitrite toxicity.

Directions: Use 1 capful (5 ml) for each 200 L (50 gallons) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 ml.

Tips: May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Seachem StressGuard is a premium slime coat protector for marine and freshwater aquariums. Using a unique formula, StressGuard reduces fish stress from transportation or handling, promotes healing, and acts as an antiseptic to reduce the risk of infection.

• Premium slime coat protection product for fresh and saltwater aquariums
• Reduces stress when handling or transporting fish
• Promotes healing and acts as an antiseptic for fish

StressGuard is compatible with all non-copper based medications. It is not amine-based and will not interfere with Purigen or HyperSorb, and does not coat resins or clog filtration like other slime coat products can.

What sets StressGuard apart The secret is a protein active colloidal agent that actively seeks out any wounds, abrasions, or exposed proteins, and attaches to the area to deliver disinfectant and begin healing. In the process, the agent also acts as a liquid bandage to keep the abrasion protected. And unlike other slime coats, StressGuard has a pH of 7.0 - meaning it will never interfere with the pH of your aquarium, even when used in large doses.

Directions: Use 1/2–1 capful (2.5–5 mL) to every 10 gallons (40 L) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Nutrafin Betta Enviro-Clean 60 mL (2 fl oz), is a betta bowl cleaner that biologically breaks down waste in betta bowls and containers while promoting clean conditions that help reduce diseases.

• Biological Betta Bowl Cleaner
• Reduces Organic Waste in Betta Bowls
• Helps Reduce Disease
• Helps Reduce Stress

INSTRUCTIONS: Shake well before using 2.5 mL (approx. ? capful) treats 3.78 L (1 U.S. gal / 0.83 U.K. gal) with every water change

Nutrafin Betta Plus - Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals. Betta Plus protects fish scales and fins, reduces nitrite toxicity, and helps reduce stress. It also helps reduce inflammation and undesirable conditions that can arise from scrapes, torn fins, and abrasions. Betta Plus also contains tropical almond leaf extract, a natural element found in betta habitats, that conditions and supports a betta-friendly environment, allowing them to thrive and show their full-color potential.

• Makes Tap Water Safe for Bettas
• Protects Scales and Fins
• Contains Tropical Almond Leaf Extract
• Helps to Reduce Stress
• Helps Reduced Inflammation from Scrapes, Torn Fins and Abrasions

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Nutrafin Betta Plus - Tap Water Conditioner makes tap water safe for bettas by neutralizing chlorine, chloramine and undesirable metals. Betta Plus protects fish scales and fins, reduces nitrite toxicity, and helps reduce stress. It also helps reduce inflammation and undesirable conditions that can arise from scrapes, torn fins, and abrasions. Betta Plus also contains tropical almond leaf extract, a natural element found in betta habitats, that conditions and supports a betta-friendly environment, allowing them to thrive and show their full-color potential.

• Makes Tap Water Safe for Bettas
• Protects Scales and Fins
• Contains Tropical Almond Leaf Extract
• Helps to Reduce Stress
• Helps Reduced Inflammation from Scrapes, Torn Fins and Abrasions

INSTRUCTIONS: Shake well before using. 5 mL (approx. 1 capful) treats 2 L (0.5 U.S. gal) with every water change.

Marina Betta Pure Water Conditioner makes tap water safe for your betta by removing harmful chlorine, chloramine and heavy metals found in tap water. Protects fish with a healthy slime coat. Use for new aquarium setups, when adding new water, or during fish transport.

• Immediately Removes Chlorine, Chloramines, and Heavy Metals
• Makes tap Water Safe for Your Betta
• Great for New Aquarium Setup, Water changes, and Fish Transport
• Contains Goji Berry

INSTRUCTIONS: Shake well before use. Add 10 drops to aquarium when adding water or during water changes (10 drops treats 1.5 gallons)

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds

SulfaPlex is an effective and safe treatment for many bacterial, fungal and protozoan infestations in the aquarium. While it can be used in both freshwater and saltwater, it is particularly effective against the common bacterial and fungal infections of freshwater fish. It is also among the gentler antibiotics, and great for treating fish that are already stressed. It is easily removed with carbon and does not impair nitrification.

• Treats Many Bacterial, Fungal, and Protozoan Infestations
• Broad Spectrum Antibiotic and Anti-Fungal Medicatoin
• Absorbed Through Gills
• Marine & Freshwater
• One of the Gentler Antibiotics, Great for Treating Fish that are Already Stressed.

INSTRUCTIONS: Dosing in Water Remove all invertebrates - these are extremely sensitive to medication. Turn off UV filters, ozone filters, and remove chemical filtration like MatrixCarbon and Purigen. Use 2-3 measures (included) per every 40 L (10 US gallons). Repeat this dose every 72 hours for a maximum of 3 weeks. Dosing in Food SulfaPlex is most effective when used in the water, but it can also be added to the food. Feed the medicated food mix (recipe below) every day until the infection clears or up to 3 weeks. 1 scoop SulfaPlex, 1 scoop Focus, 1 tbsp food (preferably pellets or frozen food). A few drops of water if using a dry food. To enhance palatability use with GarlicGuard or Entice. After Treating When the treatment period is over, SulfaPlex can easily be removed using activated filter carbon like MatrixCarbon. It does not linger in the substrate or filter media of the tank.

INGREDIENTS: sulfathiazole (69%) Inactive ingredients: excipients (31%)

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, Seachem ParaGuard contains no formaldehyde or methanol and will not alter pH.

• Parasite Control for marine or freshwater aquariums
• Contains no toxic methanol and will not alter pH
• Safe alternative to formalin

Seachem ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot).

It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

DIRECTIONS: In the aquarium, use 5 mL (1 capful) to every 40 L (10 gallons). Repeat daily as required as long as fish show no stress. For 1 hour dips, use 3 mL per 4 L (1 gallon). Dips may be extended if fish show no evidence of stress. In case of eye exposure, promptly and thoroughly wash eyes with water and seek medical attention.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Replenish is specially designed to replenish physiologically needed minerals that have been removed during reverse osmosis or deionizing filtration.

• Designed to replenish physiologically needed minerals
• Restore General Hardness (GH) using "soft" and "hard" salts
• Helps prevent sudden death due to osmotic stress

Replenish will restore General Hardness (GH) using "soft" and "hard" salts. This special blend of salts will help prevent sudden death due to osmotic stress which causes osmotic shock.

Dosage: 500 ml (16.9 oz) treats 1,000 gallons.

Directions: Add 5 mL (1 capful) Replenish to 10 Gallons to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 5-10 gallons.

Weco Wonder Shells are great for pH, calcium and water hardness control in small aquariums and fish bowls. These all-in-one treatments provide calcium carbonate, sodium thiosulfate, and necessary trace elements, including magnesium.

• Helps keep aquarium clear and maintains stable pH levels
• Adds necessary minerals while removing chlorine
• Great for goldfish, livebearers, cichlids and more

Weco Wonder Shells provide magnesium and calcium, which have been proven to help fish during stress and to prevent disease due to acid buildup in the body. These shells instantly remove chlorine and chloramines from tap water while also clearing cloudiness. Scour inner glass walls with a Wonder Shell to remove scum and to deter its return.

Sizing:
Small: Bowls up to 1 Gallon
Large: Tanks up to 5 Gallons
Super: Tanks 10-15 Gallons
Giant: Fish Ponds