Seachem

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

Matrix carbon is a truly unique Activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with its high density of microporous binding sites. Matrix carbon has a very low ash content as indicated by its minimal impact on ph. Even when added to distilled water, it does not raise pH above 7.0. While all carbons contain phosphate, regardless of false claims to the contrary, matrix carbon has the Lowest detectable leachable phosphate content of all major carbon brands tested. Matrix carbon outperforms other high grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use.

• No Binding or packing
• Will not raise pH over 7.0
• High performance

Seachem NeoPlex Broad Spectrum Antibiotic is effective against most external infections. When used as directed NeoPlex will not discolor the water or damage the filter bed and is well tolerated by most invertebrates. Neoplex is safe for both marine and freshwater fish.

• Treats external fungal and bacterial disease
• For marine & freshwater
• Will not discolor water

Seachem pH Alert Reader is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly to alert you shifts to in pH levels between 5.8 and 8.5.

• No strips, no tests, just constant readings
• Detects pH shifts anytime for 3-6 months
• Small and unobtrusive
• For freshwater use only

DIRECTIONS: Simply place Sea Chem pH Alert Reader visibly anywhere in the aquarium or filter. Its that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes. The life of the pH Alert Reader sensor may vary depending on a variety of tank parameters. A replacement sensor is included to ensure effectiveness for 3 to 6 months. Sensor exhaustion is indicated by a visible fading or washing out of sensor color.

Seachem One Year Combo Alert uses Seachem water sensor technology to continuously monitor ammonia and freshwater pH in your aquarium for an entire year, no tests or strips required. All you have to do is hang it in your tank!

• Continuous freshwater pH and ammonia readings
• No strips, no tests, just constant readings
• Easy monitoring - just hang in your tank

Ammonia Alert: The sensor automatically detects free ammonia at levels less than 0.05 mg/L (ppm) and alerts you to the presence of the primary killer of fish before it reaches hazardous levels and causes signs of stress. In the absence of free ammonia the sensor will assume a yellow color, and will move to green and blue as more ammonia is detected. Ammonia is detected continuously with a response time of just 15 minutes, allowing you to respond immediately and avoid further increases. Ammonia Alert lasts over 9 times as long as competing products, and is only about half the size.

pH Alert: pH is constantly monitored, with a sensor that alerts you to shifts in pH levels between 5.4 and 8.0 (freshwater only). It lasts up to 4 times as long as competing products and is small, clear, and unobtrusive when in the tank.

The Seachem Alert Combo pack is a revolutionary way to keep tabs on your aquariums essential levels. This unique tester provides continuous pH and ammonia readings for up to 6 months, eliminating the need for strips and complicated tests.

• Continuous freshwater pH and ammonia readings
• No strips, no tests, just constant readings
• Up to 6 months of constant monitoring

Alert Combo is easy to use: just place each reader somewhere visible in your aquarium, and you're done! After only a few minutes the readers will automatically detect and display your waters pH and ammonia levels using a simple color-coded system, and will continuously update every 10 minutes after that. No care is required beyond removing any algae accumulation with a clean, soft material.

Ammonia Alert works in freshwater and marine aquariums, and provides continuous readings for up to 1 year. pH Alert works only in freshwater aquariums, and provides continuous readings of pH levels between 5.4 and 8.0 for 3-6 months.

Seachem Ammonia Alert is an innovative color device for continuously detecting and monitoring free ammonia in aquariums. A sensor changes from yellow to green to blue, relative to the ammonia concentration in the water. Seachem Ammonia Alert detects less than 0.05 mg/L (ppm) free ammonia and alerts you before fish show any signs of stress. It lasts over a year and replacement sensors are available.

• Easy visual gauge to monitor ammonia in your reef or fish tank
• Use in saltwater or freshwater aquariums
• Provides 1 year of ammonia detection

In the absence of free ammonia the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to register a SAFE reading.