Seachem

Reef Calcium is a concentrated (50,000 mg/L) bioavailable polygluconate complexed calcium intended to maintain calcium in the reef aquarium without altering pH. Additionally, polygluconate contains no nitrogen or phosphorous, thus it is biologically impossible for it to lead to algae growth in a properly maintained reef system. Reef Calcium utilizes a chained organic calcium rather than an ionic calcium. When a coral absorbs a molecule into its tissue, it uses the same amount of energy regardless of molecular size. However, charged molecules require more energy. When an uncharged molecule of Reef Calcium is absorbed, the coral acquires multiple calcium atoms as well as an easily metabolized carbohydrate with less energy expended than it uses for ionic calcium uptake. Therefore, at lower calcium levels, corals can still take in as much calcium through our organic chains as they would at much higher levels of ionic calcium.

• Increases the bioavailability of the calcium
• Provides a rich source of metabolic energy
• Maintains peak coral growth
• Prevents calcium precipitation/alkalinity depletion
• Will not lead to algae growth in a properly maintained reef system

Directions: Add 1 capful (5 mL) per 80 L (20 US gallons) twice a week. You can increase the amount or frequency based on growth response but do not exceed 3 capfuls per 80 L (20 gallons) per day. Each capful will raise calcium by about 3 mg/L.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Seachem Marine Buffer will safely raise the pH of saltwater to 8.3, and will not raise the pH above 8.3 even if overdosed. Marine Buffer is a blended product, and contains sodium, magnesium, calcium, strontium, and potassium salts to provide effective results.

• Safely raises and maintains saltwater pH to 8.3
• More stable than sodium bicarbonate or sodium bicarbonate substitutes
• Will not raise pH above 8.3 even if inadvertently overdosed

Seachem Marine Buffer is not just sodium bicarbonate or sodium carbonate (commonly sold as a substitute), as these products can raise pH to dangerous levels if not used properly. Instead it includes a variety of minerals and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate for safe, accurate dosing.

Directions: Add 5g (1 level teaspoon) for each 20 gallons (80 L). Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within about 15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

Note: Product is sold by weight, not volume. Contents may settle in shipment.

Reef Complete is a concentrated (160,000 mg/L) optimized blend of ionic calcium designed to restore and maintain calcium to levels found in natural seawater without affecting pH. Calcium and carbonates are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide calcium (Reef complete) and carbonates (Reef Builder or Reef Carbonate) Reef Complete also includes magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg: Sr). This allows one to maintain these two important elements while maintaining calcium. Reef Complete is a blended product. It is not simply calcium chloride. Commercially available calcium chloride contains ammonia. Unlike other ionic calcium supplements, Reef Complete is blended to a higher pH to force the ammonia to gas off into the atmosphere. Also, Reef Complete is more concentrated than any other liquid product on the market. Reef Complete contains 160,000 ppm calcium.

• Liquid Ionic Calcium Source
• Maintains Magnesium & Strontium
• Raises Calcium
• Essential to Coral Growth
• Will Not Affect pH

INSTRUCTIONS: Beginner: Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week. Check calcium every 2 weeks and adjust the amount or frequency accordingly

Advanced: Check calcium level (use Reef Status: Calcium to measure calcium), then follow the addition regimen above until calcium is adjusted to 380-420 mg/L. Each 5 mL/80 L (20 US gallons) will raise calcium by about 10 mg/L. Quantity or frequency can be adjusted, but do not exceed 12.5 mL/80 L (20 US gallons) per day. Thereafter, use as required to maintain calcium.

Expert: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top off water: m=vc/160 (m=mL of product to add to top off water, v=volume of the tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 US gallon=3.8 L].

If used with Reef Calcium, it is not necessary to exceed 380 mg/L total calcium. Use Reef Status: Calcium to measure calcium.

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart.

INGREDIENTS: Amounts per 1g Calcium (Ca) (min)

Reef Complete is a concentrated (160,000 mg/L) optimized blend of ionic calcium designed to restore and maintain calcium to levels found in natural seawater without affecting pH. Calcium and carbonates are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide calcium (Reef complete) and carbonates (Reef Builder or Reef Carbonate) Reef Complete also includes magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg: Sr). This allows one to maintain these two important elements while maintaining calcium. Reef Complete is a blended product. It is not simply calcium chloride. Commercially available calcium chloride contains ammonia. Unlike other ionic calcium supplements, Reef Complete is blended to a higher pH to force the ammonia to gas off into the atmosphere. Also, Reef Complete is more concentrated than any other liquid product on the market. Reef Complete contains 160,000 ppm calcium.

• Liquid Ionic Calcium Source
• Maintains Magnesium & Strontium
• Raises Calcium
• Essential to Coral Growth
• Will Not Affect pH

INSTRUCTIONS: Beginner: Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week. Check calcium every 2 weeks and adjust the amount or frequency accordingly

Advanced: Check calcium level (use Reef Status: Calcium to measure calcium), then follow the addition regimen above until calcium is adjusted to 380-420 mg/L. Each 5 mL/80 L (20 US gallons) will raise calcium by about 10 mg/L. Quantity or frequency can be adjusted, but do not exceed 12.5 mL/80 L (20 US gallons) per day. Thereafter, use as required to maintain calcium.

Expert: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top off water: m=vc/160 (m=mL of product to add to top off water, v=volume of the tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 US gallon=3.8 L].

If used with Reef Calcium, it is not necessary to exceed 380 mg/L total calcium. Use Reef Status: Calcium to measure calcium.

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart.

INGREDIENTS: Amounts per 1g Calcium (Ca) (min)

Seachem Reef Advantage Calcium is a non-caustic (pH 8.3-8.6) optimized blend of ionic calcium designed to restore and maintain calcium levels to those found in natural seawater. Note that if either calcium or carbonates become deficient, coral growth will cease, followed by a rapid decline in coral health.

• Raises calcium to natural seawater levels
• Capable of raising 20 gallons of water by 25 ppm of calcium with only 1 teaspoon
• Non-caustic and pH balanced (pH 8.3-8.6)
• Maintains magnesium and strontium, will not deplete alkalinity

In addition to calcium, Reef Advantage provides magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg:Sr), helping to maintain three critical elements at once. Unlike limewater (kalkwasser), Reef Advantage Calcium does not have a caustic pH and will not deplete magnesium. When used as directed, it will not deplete alkalinity.

Directions:
BEGINNER: Use 5 g (1 level teaspoon) per 150 L (40 US gallons) twice a week. For precise dosing, use the Seachem Digital Spoon Scale. Dissolve in at least 250 ml (1 cup) of freshwater. Check calcium every 2 weeks and adjust amount or frequency accordingly.

ADVANCED: Check calcium level, then follow addition regimen above until calcium is adjusted to 380–420 mg/L. Each 5 g/150 L will raise calcium by about 12 mg/L. Quantity or frequency can be adjusted, but do not exceed 10 g/150 L per day. Thereafter, use as required to maintain calcium.

EXPERT: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top-off water: m=vc/400 (m=grams to add to top off water, v=volume of tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 gallon=3.8 liters, 5 g=1 teaspoon].

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium and carbonate additives are added on alternate days or at least 30 minutes apart.

Ingredients: Calcium Chloride, Magnesium Chloride, Strontium Chloride.

Guaranteed Analysis:
Calcium (Ca) (min) - 335 mg; (max) - 347 mg
Magnesium (Mg) (min) - 17 mg
Strontium (Sr) (min) - 0.34 mg

Seachem Reef Advantage Calcium is a non-caustic (pH 8.3-8.6) optimized blend of ionic calcium designed to restore and maintain calcium levels to those found in natural seawater. Note that if either calcium or carbonates become deficient, coral growth will cease, followed by a rapid decline in coral health.

• Raises calcium to natural seawater levels
• Capable of raising 20 gallons of water by 25 ppm of calcium with only 1 teaspoon
• Non-caustic and pH balanced (pH 8.3-8.6)
• Maintains magnesium and strontium, will not deplete alkalinity

In addition to calcium, Reef Advantage provides magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg:Sr), helping to maintain three critical elements at once. Unlike limewater (kalkwasser), Reef Advantage Calcium does not have a caustic pH and will not deplete magnesium. When used as directed, it will not deplete alkalinity.

Directions:
BEGINNER: Use 5 g (1 level teaspoon) per 150 L (40 US gallons) twice a week. For precise dosing, use the Seachem Digital Spoon Scale. Dissolve in at least 250 ml (1 cup) of freshwater. Check calcium every 2 weeks and adjust amount or frequency accordingly.

ADVANCED: Check calcium level, then follow addition regimen above until calcium is adjusted to 380–420 mg/L. Each 5 g/150 L will raise calcium by about 12 mg/L. Quantity or frequency can be adjusted, but do not exceed 10 g/150 L per day. Thereafter, use as required to maintain calcium.

EXPERT: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top-off water: m=vc/400 (m=grams to add to top off water, v=volume of tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 gallon=3.8 liters, 5 g=1 teaspoon].

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium and carbonate additives are added on alternate days or at least 30 minutes apart.

Ingredients: Calcium Chloride, Magnesium Chloride, Strontium Chloride.

Guaranteed Analysis:
Calcium (Ca) (min) - 335 mg; (max) - 347 mg
Magnesium (Mg) (min) - 17 mg
Strontium (Sr) (min) - 0.34 mg

Seachem Reef Advantage Calcium is a non-caustic (pH 8.3-8.6) optimized blend of ionic calcium designed to restore and maintain calcium levels to those found in natural seawater. Note that if either calcium or carbonates become deficient, coral growth will cease, followed by a rapid decline in coral health.

• Raises calcium to natural seawater levels
• Capable of raising 20 gallons of water by 25 ppm of calcium with only 1 teaspoon
• Non-caustic and pH balanced (pH 8.3-8.6)
• Maintains magnesium and strontium, will not deplete alkalinity

In addition to calcium, Reef Advantage provides magnesium and strontium in amounts proportionate to typical utilization ratios (100:5:0.1, Ca:Mg:Sr), helping to maintain three critical elements at once. Unlike limewater (kalkwasser), Reef Advantage Calcium does not have a caustic pH and will not deplete magnesium. When used as directed, it will not deplete alkalinity.

Directions:
BEGINNER: Use 5 g (1 level teaspoon) per 150 L (40 US gallons) twice a week. For precise dosing, use the Seachem Digital Spoon Scale. Dissolve in at least 250 ml (1 cup) of freshwater. Check calcium every 2 weeks and adjust amount or frequency accordingly.

ADVANCED: Check calcium level, then follow addition regimen above until calcium is adjusted to 380–420 mg/L. Each 5 g/150 L will raise calcium by about 12 mg/L. Quantity or frequency can be adjusted, but do not exceed 10 g/150 L per day. Thereafter, use as required to maintain calcium.

EXPERT: After determining the calcium consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top-off water: m=vc/400 (m=grams to add to top off water, v=volume of tank in liters, c=amount to raise calcium in mg/L). [For reference: 1 gallon=3.8 liters, 5 g=1 teaspoon].

DO NOT OVERDOSE: Excess calcium may enhance the loss of carbonate alkalinity. Do not directly mix with any carbonate supplement. Best if calcium and carbonate additives are added on alternate days or at least 30 minutes apart.

Ingredients: Calcium Chloride, Magnesium Chloride, Strontium Chloride.

Guaranteed Analysis:
Calcium (Ca) (min) - 335 mg; (max) - 347 mg
Magnesium (Mg) (min) - 17 mg
Strontium (Sr) (min) - 0.34 mg

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that won't crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

• High quality silicone sealant
• 100% RTV silicone
• Suitable for freshwater and saltwater aquariums
• Won't crack, dissolve or shrink
• Provides a watertight seal

The sealant is black in color and comes in a 3 oz tube

Seachem Silicone Sealant is a top-of-the-line 100% RTV silicone sealant designed to seal and repair freshwater and saltwater aquariums. The formula creates a permanently flexible, watertight seal with a high tensile strength that won't crack, dissolve or shrink from the pressure or stress caused by the weight of water in your tank. The solution provides unmatched adhesion and sports a clear color.

• High quality silicone sealant
• 100% RTV silicone
• Suitable for freshwater and saltwater aquariums
• Won't crack, dissolve or shrink
• Provides a watertight seal

The sealant is clear in color and comes in a 3 oz tube

Struggling with your aquatic hardscape designs Well, Seachem has a solution for you! Flourish Epoxy is a powerful epoxy adhesive that helps safely and securely create planted aquarium hardscape designs out of materials such as rocks and driftwood. Simply balancing large piles of rocks in the aquarium can result in these structures collapsing and damaging your aquarium or worse, harming your fish. Instead of leaving it up to chance, use Flourish Epoxy to secure your hardscapes. For added benefit, the solution is incredibly fast-acting, with a working time of only 5 minutes and will fully cure both submerged or emerged within 24 hours! Completely safe for even the most sensitive aquarium inhabitants.

• Powerful epoxy adhesive
• Ideal for planted tank hardscapes
• Safely secures rocks and driftwood
• Fully cures within 24 hours
• Safe for all aquarium inhabitants

The epoxy is brown in color and comes in a 4 oz tube

Struggling with your aquatic hardscape designs Well, Seachem has a solution for you! Flourish Epoxy is a powerful epoxy adhesive that helps safely and securely create planted aquarium hardscape designs out of materials such as rocks and driftwood. Simply balancing large piles of rocks in the aquarium can result in these structures collapsing and damaging your aquarium or worse, harming your fish. Instead of leaving it up to chance, use Flourish Epoxy to secure your hardscapes. For added benefit, the solution is incredibly fast-acting, with a working time of only 5 minutes and will fully cure both submerged or emerged within 24 hours! Completely safe for even the most sensitive aquarium inhabitants.

• Powerful epoxy adhesive
• Ideal for planted tank hardscapes
• Safely secures rocks and driftwood
• Fully cures within 24 hours
• Safe for all aquarium inhabitants

The epoxy is gray in color and comes in a 4 oz tube

Seachem CoralCrete Epoxy Adhesive securely attaches coral to decorative rockwork in freshwater, marine and reef aquariums. This two-part epoxy putty may also be used to fuse together a stable rockwork foundation for future coral growth. Available in gray or purple, CoralCrete is a must-have for aquariums with branching, polyp, or plating corals.

• Secures coral to rockwork
• Fully cures submerged or emerged within 24 hours
• Matches synthetic reef rock
• Safe for marine & freshwater aquariums

Directions: For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved. Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to ensure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over-activate during cure time.

Note: There is no functional difference between the purple and gray epoxies. Choose whichever color best matches your rock and coral coloring.

Seachem CoralCrete Epoxy Adhesive securely attaches coral to decorative rockwork in freshwater, marine and reef aquariums. This two-part epoxy putty may also be used to fuse together a stable rockwork foundation for future coral growth. Available in gray or purple, CoralCrete is a must-have for aquariums with branching, polyp, or plating corals.

• Secures coral to rockwork
• Fully cures submerged or emerged within 24 hours
• Matches synthetic reef rock
• Safe for marine & freshwater aquariums

Directions: For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved. Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to ensure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over-activate during cure time.

Note: There is no functional difference between the purple and gray epoxies. Choose whichever color best matches your rock and coral coloring.

Seachem CoralCrete Epoxy Adhesive securely attaches coral to decorative rockwork in freshwater, marine and reef aquariums. This two-part epoxy putty may also be used to fuse together a stable rockwork foundation for future coral growth. Available in gray or purple, CoralCrete is a must-have for aquariums with branching, polyp, or plating corals.

• Secures coral to rockwork
• Fully cures submerged or emerged within 24 hours
• Matches synthetic reef rock
• Safe for marine & freshwater aquariums

Directions: For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved. Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to ensure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over-activate during cure time.

Note: There is no functional difference between the purple and gray epoxies. Choose whichever color best matches your rock and coral coloring.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia.

• Adjusts high or low pH to 7.0
• Removes chlorine, chloramines and ammonia
• Makes other conditioning unnecessary

The use of SeaChem Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.

Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Seachem Malawi/Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness and buffer capacity, and reaching and maintaining a healthy pH range of 7.8-8.4.

• Raises and maintains a pH range of 7.8 - 8.4
• Freshwater aquarium additive increases water hardness (alkalinity)
• pH conditioner/buffer for Malawi and Victoria cichlids

For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace.

Directions: Use 5 g (1 level teaspoon) for each 10 to 20 gallons of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

Tips: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachems Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachems Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachems Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.

Tanganyika Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing alkalinity, carbonate hardness, buffer capacity, and pH. It is formulated to maintain a pH of 9.0 to 9.4.

• Designed to enhance the natural environment of cichlids
• Increases water hardness, buffer capacity, and pH.
• Formulated to maintain a pH of 9.0 to 9.4

Instructions: Use 5 g (1 level teaspoon) for each 40 to 80 L (10 to 20 US gallons) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks.

TIPS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachem Tanganyika Buffer is formulated to maintain a pH between 9.0 and 9.4, depending on the amount used. For lower pH, use Malawi/Victoria Buffer (pH 7.8 so 8.4), either alone or in combination with Tanganyika Buffer.

Seachem Cichlid Lake Salt is a chemically-sound blend of salts designed to replicate the natural environment of cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium and potassium, as well as trace elements such as iron, aluminum, and iodide.

• Chemically sound blend of salts
• Replicates the natural environment of African Cichlids
• Contains all physiologically essential elements

Contains no harmful or unnecessary ingredients such as nitrates, phosphates, arsenic, lithium, or cadmium.

Dosing: (by fish origin)

• Tanganyika - 1.5 tsp. per 10 gallons (250 grams treats 160 gallons)
• Malawi - .75 tsp. per 10 gallons (250 grams treats 350 gallons)
• Victoria - .5 tsp. per 10 gallons (250 grams treats 500 gallons)

Directions: (All doses given for 10 gallons [40 L])

• Tanganyika: Use 11 g (1.5 teaspoons).
• Malawi: Use 5.5 g (3/4 teaspoons).
• Victoria: Use 3.6 g (1/2 teaspoon).
• pH Buffering: Seachems Tanganyika Buffer (pH 9.0–9.4) and Malawi/Victoria Buffer (pH 7.8–8.4) should be used to adjust carbonate hardness and pH.

Tips: Use when setting up an aquarium and when making water changes. To add salt to an established tank, base dose on water being changed. Do not use salt when simply replacing evaporated water. It is best to dissolve the salt in freshwater before use.

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.