Seachem

Seachem Cichlid Lake Salt is a chemically-sound blend of salts designed to replicate the natural environment of cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium and potassium, as well as trace elements such as iron, aluminum, and iodide.

• Chemically sound blend of salts
• Replicates the natural environment of African Cichlids
• Contains all physiologically essential elements

Contains no harmful or unnecessary ingredients such as nitrates, phosphates, arsenic, lithium, or cadmium.

Dosing: (by fish origin)

• Tanganyika - 1.5 tsp. per 10 gallons (250 grams treats 160 gallons)
• Malawi - .75 tsp. per 10 gallons (250 grams treats 350 gallons)
• Victoria - .5 tsp. per 10 gallons (250 grams treats 500 gallons)

Directions: (All doses given for 10 gallons [40 L])

• Tanganyika: Use 11 g (1.5 teaspoons).
• Malawi: Use 5.5 g (3/4 teaspoons).
• Victoria: Use 3.6 g (1/2 teaspoon).
• pH Buffering: Seachems Tanganyika Buffer (pH 9.0–9.4) and Malawi/Victoria Buffer (pH 7.8–8.4) should be used to adjust carbonate hardness and pH.

Tips: Use when setting up an aquarium and when making water changes. To add salt to an established tank, base dose on water being changed. Do not use salt when simply replacing evaporated water. It is best to dissolve the salt in freshwater before use.

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

SeaChem Discus Buffer helps to replicate the ideal Discus environment (low pH and low GH (General Hardness)). Discus Buffer will lower pH and keep it lowered. Discus Buffer also softens water by precipitating calcium and magnesium.

• Adjusts pH to 5.8 - 6.8
• Helps to replicate the ideal Discus environment
• Softens water by precipitating calcium and magnesium

Use SeaChem Discus Trace to restore the proper level of trace elements required by thriving, healthy Discus.

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem.

• Lowers aquarium pH and buffers from 6.0 to 8.0
• Converts alkalinity into CO2
• For the planted aquarium or very hard water

Seachem Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water.

Directions: To lower pH, use 1/4 teaspoon (2g) for every 80 L (20 US gallons) daily until desired pH is reached (this dose lowers alkalinity by about 0.2 meq/L (0.6 dKH)). Larger doses may be required in very hard (KH) or alkaline waters.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem Alkaline Buffer raises the pH and alkalinity (KH) of your aquarium water and holds it steady between 7.2 and 8.5 - an ideal range for most freshwater environments. Alkaline Buffer is safe, gentle, and phosphate-free to reduce the risk of algae or cloudiness.

• Raises pH and increases alkalinity
• Buffers pH between 7.2 and 8.5
• Great for planted aquariums or very hard water

Seachem Alkaline Buffer is a sodium bicarbonate-based buffer. This makes it slightly less stable than phosphate buffers, but better suited for planted aquariums where adding more phosphates would lead to an algae problem.

Dosage:
300 grams (10.5 oz): Treats 860 Gallons
600 grams (1.3 lbs): Treats 1,720 Gallons
1.2 kg (2.6 lbs): Treats 3,440 Gallons
4 kg (8.8 lbs): Treats 11,640 Gallons

Directions: To increase pH, use 1 teaspoon (7g) for every 80 L (20 gallons) daily until the desired pH is reached (this dose raises alkalinity by about 1 meq/L (2.8 dKH)). For precise dosing, use the Seachem Digital Spoon Scale. In order to adjust pH gradually, use Alkaline Buffer with Acid Buffer.

FAQ:

• Q: What is the difference between Neutral Regulator, Discus Buffer, Alkaline Buffer, and Acid Buffer
  A: Neutral Regulator and Discus Buffer are phosphate-based buffers providing a very strong and stable buffering system. Alkaline Buffer and Acid Buffer are non-phosphate buffers, which although less stable than a phosphate buffer, are ideal for the planted aquarium where high phosphate levels would lead to an algae problem.
• Q: Is Alkaline Buffer a sodium bicarbonate
  A: Yes, it is a sodium bicarbonate-based buffer.

Seachem live bearer/brackish aquarium salt is a chemically sound blend of salts designed to replicate the native environment of live bearers and other brackish estuary fish without adversely impacting on aquatic plants when used at regionally specific recommended dosage. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For low range pH control Use Acid buffer, discus buffer, South American Cichlid buffer 4. 5, or Acid regulator. Use neutral regulator, Central American Cichlid buffer or South American Cichlid buffer 7. 0 for neutral pH. For high range pH control Use alkaline regulator, alkaline buffer or Tanganyika buffer.

• A chemically sound blend of salts designed to replicate native environment of live bearers and other brackish estuary fish
• Designed to function without adversely impacting on aquatic plants when used at regionally specific recommended dosage
• Well suited for routine Aquarium freshwater dosage
• Does not impact pH or provide buffering
<

Cuprisorb is a powerful adsorbent of copper and heavy metals. Cuprisorb will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts All types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous use, it will gradually extract even precipitated copper from the gravel/substrate bed as well. Cuprisorb will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates.

• Powerful adsorbent of copper and heavy metals
• Copper specific chelating resin
• Removes all types of copper

Seachem Flourish Phosphorus helps accelerate and enhance the growth of live aquarium plants, without contributing to nuisance algae growth. This simple, safe solution contains no nitrates, allowing precise phosphorus dosing to meet your plants' needs.

• Phosphorus supplement for the planted aquarium
• Safe solution (4,500 mg/L) of potassium phosphate
• Contains no nitrate and does not contribute to algae growth

Flourish Phosphorus supplies an ideal concentration (4,500 mg/L) of phosphorus, one of the three macro nutrients required for healthy plant growth (the others are nitrogen and potassium). Unlike competing products, it is nitrate-free and allows you to accurately dose your aquariums phosphate levels without the risk of overdosing nitrates. Use Flourish Phosphorus along with Flourish Nitrogen and Flourish Potassiumto achieve an ideal ratio of all three nutrients.

Directions:
Beginner: Use 2.5 mL (half a cap) for each 80 L (20 gallons) once ot twice a week or as needed in response to signs of phosphorus deficiency (such as stunted growth and/or very dark green coloring).

Expert: The beginner dose raises phosphorus by 0.05 mg/L (0.15 mg/L phosphate). The ideal phosphate level will vary, but generally ranges from 0.15-1.0 mg/L. Use a reliable test kit to monitor phosphate levels. To target a specific phosphate increase, dose according to the following formula: 0.8vp=m, where v=volume of tank in gallons, p=desired phosphate increase and m=volume of product to use (in mL). For example, to raise 20 gallons to 0.1 mg/L phosphate you would use: 0.8x20x0.1=1.6 mL.

Guaranteed Analysis:
Total Phosphate (P2O5) - 0.3%
Soluble Potash (K2O) - 0.2%

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.

• Removes nitrates, nitrites, ammonia and organics
• Supports growth of beneficial bacteria that eliminate toxins
• Suitable for fresh and saltwater tanks

Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.

Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem Stability quickly stabilizes new aquarium environments and establishes the bio-filter for rapid, safe startup. Its unique blend of aerobic, anaerobic and facultative bacteria break down organic waste and toxic ammonia, nitrate and nitrite to prevent "new tank syndrome," the #1 cause of fish death.

• New tank stabilization system for marine and freshwater
• Rapidly and safely establishes bio-filter
• Prevents fish death from "new tank syndrome"

Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms (including aquatic plants) so there is no danger of overuse. The result of nearly a decade of research and development, Seachem Stability represents the current state of the art in natural biological management.

Directions: Use 1 capful (5 mL) for each 40 L (10 gallons) on the first day with a new aquarium. After that use 1 capful for each 80 L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum bio-filter performance use 1 capful for each 40 L (10 gallons) once a month or with each water change, whenever introducing new fish, or whenever medicating an aquarium.

Tip: Use along with Seachem Prime when setting up a new tank to create an ideal safe environment for your fish.

Seachem NeoPlex Broad Spectrum Antibiotic is effective against most external infections. When used as directed NeoPlex will not discolor the water or damage the filter bed and is well tolerated by most invertebrates. Neoplex is safe for both marine and freshwater fish.

• Treats external fungal and bacterial disease
• For marine & freshwater
• Will not discolor water

Seachem Ammonia Alert is an innovative color device for continuously detecting and monitoring free ammonia in aquariums. A sensor changes from yellow to green to blue, relative to the ammonia concentration in the water. Seachem Ammonia Alert detects less than 0.05 mg/L (ppm) free ammonia and alerts you before fish show any signs of stress. It lasts over a year and replacement sensors are available.

• Easy visual gauge to monitor ammonia in your reef or fish tank
• Use in saltwater or freshwater aquariums
• Provides 1 year of ammonia detection

In the absence of free ammonia the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to register a SAFE reading.

The Seachem Alert Combo pack is a revolutionary way to keep tabs on your aquariums essential levels. This unique tester provides continuous pH and ammonia readings for up to 6 months, eliminating the need for strips and complicated tests.

• Continuous freshwater pH and ammonia readings
• No strips, no tests, just constant readings
• Up to 6 months of constant monitoring

Alert Combo is easy to use: just place each reader somewhere visible in your aquarium, and you're done! After only a few minutes the readers will automatically detect and display your waters pH and ammonia levels using a simple color-coded system, and will continuously update every 10 minutes after that. No care is required beyond removing any algae accumulation with a clean, soft material.

Ammonia Alert works in freshwater and marine aquariums, and provides continuous readings for up to 1 year. pH Alert works only in freshwater aquariums, and provides continuous readings of pH levels between 5.4 and 8.0 for 3-6 months.

Seachem One Year Combo Alert uses Seachem water sensor technology to continuously monitor ammonia and freshwater pH in your aquarium for an entire year, no tests or strips required. All you have to do is hang it in your tank!

• Continuous freshwater pH and ammonia readings
• No strips, no tests, just constant readings
• Easy monitoring - just hang in your tank

Ammonia Alert: The sensor automatically detects free ammonia at levels less than 0.05 mg/L (ppm) and alerts you to the presence of the primary killer of fish before it reaches hazardous levels and causes signs of stress. In the absence of free ammonia the sensor will assume a yellow color, and will move to green and blue as more ammonia is detected. Ammonia is detected continuously with a response time of just 15 minutes, allowing you to respond immediately and avoid further increases. Ammonia Alert lasts over 9 times as long as competing products, and is only about half the size.

pH Alert: pH is constantly monitored, with a sensor that alerts you to shifts in pH levels between 5.4 and 8.0 (freshwater only). It lasts up to 4 times as long as competing products and is small, clear, and unobtrusive when in the tank.

Seachem pH Alert Reader is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly to alert you shifts to in pH levels between 5.8 and 8.5.

• No strips, no tests, just constant readings
• Detects pH shifts anytime for 3-6 months
• Small and unobtrusive
• For freshwater use only

DIRECTIONS: Simply place Sea Chem pH Alert Reader visibly anywhere in the aquarium or filter. Its that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes. The life of the pH Alert Reader sensor may vary depending on a variety of tank parameters. A replacement sensor is included to ensure effectiveness for 3 to 6 months. Sensor exhaustion is indicated by a visible fading or washing out of sensor color.

Seachem Matrix Bio Media is a highly porous media designed to provide exceptionally efficient biofiltration for single site removal of ammonia, nitrite, and nitrate from freshwater, marine, and reef aquaria.

• Premium natural bio-filter support media
• Removes ammonia, nitrite and nitrate from fresh, salt and reef tanks
• 1 liter is equivalent to over 40 L of typical plastic ball media

Each liter of Matrix provides over 160,000 cm2 (170 sq. ft.) of surface, equivalent to over 40 L (10 gallons) of typical plastic ball media! This product is sold by volume. Cited weight is minimal weight.

Directions: Use 500 mL of Matrix for each 200 L (50 gallons) of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications.